Apprentice Welder/Fabricator

Summary

Working towards a Level 3 Plate Welding Apprenticeship developing the next generation of world-class engineers. The role includes learning how to read engineering drawings, working on exciting engineering projects daily, and understanding and learning MIG / TIG welding.

Annual wage

£15,704 a year

Minimum wage rates (opens in new tab)

£7.55ph

Training course

Plate welder (level 3)

Hours

Monday - Thursday 7.30am - 4.00pm and Friday 7.30am - 3.00pm.

40 hours a week

Possible start date

Monday 1 September

Duration

3 years

Positions available

20

Work

As an apprentice, you’ll work at a company and get hands-on experience. You’ll gain new skills and work alongside experienced staff.

What you’ll do at work

Learn how to read engineering drawings
Working on exciting engineering projects daily
Understanding and learning MIG / TIG welding

Where you’ll work

Grange Lane

Brinsworth

Rotherham

S60 5AE

Training

An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.

College or training organisation

WEC GROUP LIMITED

Your training course

Plate welder (level 3)

Equal to A level

Course contents

Work safely at all times, comply with health, safety and environmental legislation, regulations and organisational requirements.
Can obtain, check and use appropriate documentation (such as job instructions, drawings, quality control documentation).
Plan and prepare welding activities before commencing the work.
Obtain, position and assemble welding equipment and associated safety protection needed for activity.
Prepare, check and protect materials and work areas ready for welding.
Inspect assembly to be welded and undertake remedial work to comply with specification, or implement quality steps if rejected.
Receive, inspect, condition and maintain consumables.
Set, test and monitor key welding parameters as detailed within the Welding Procedure Specification.
Deal promptly and effectively with problems within the limits of their responsibility using approved diagnostic methods and techniques and report those which cannot be resolved to the appropriate personnel.
Use manual processes and equipment to remove material (powered and non‐powered).
Achieves a quality of work to meet international standards e.g. ISO5817, ISO9606, ASME IX, AWS D1.1 for dimensional, surface inspection (e.g. Visual, Magnetic Particle, Dye Penetrant) and volumetric inspection (e.g. Radiography, Ultrasonic inspection).
Complete progressive and final checks on the weld prior to release for formal inspection and report into the production control system at the appropriate stages of the work activity.
Restore the work area on completion of the activity and where applicable return any resources and consumables to the appropriate location.
Produce welds in plate and/or structural components using two welding processes from TIG, PAW, MMA, MIG/MAG, FCAW.
Produce welds in plate and/or structural components using two materials from Carbon Steel, Low Alloy Steel, High Alloy Ferritic/Martensitic Steel, Austenitic Stainless Steel, Nickel & Nickel Alloys, Aluminium & Aluminium alloys, Titanium & Titanium Alloys, Copper & Copper Alloys.
Produce welds in plate and/or structural components covering three plate welding positions which must include Vertical (either upward or downward progression) and overhead.
Produce plate welds in 3 main joint configurations (Single or Double Sided Butt, Single or Double Sided T‐Butt & Fillet)
Work safely at all times, comply with health, safety and environmental legislation, regulations and organisational requirements.
Can obtain, check and use appropriate documentation (such as job instructions, drawings, quality control documentation).
Plan and prepare welding activities before commencing the work.
Obtain, position and assemble welding equipment and associated safety protection needed for activity.
Prepare, check and protect materials and work areas ready for welding.
Inspect assembly to be welded and undertake remedial work to comply with specification, or implement quality steps if rejected.
Receive, inspect, condition and maintain consumables.
Set, test and monitor key welding parameters as detailed within the Welding Procedure Specification.
Deal promptly and effectively with problems within the limits of their responsibility using approved diagnostic methods and techniques and report those which cannot be resolved to the appropriate personnel.
Use manual processes and equipment to remove material (powered and non‐powered).
Achieves a quality of work to meet international standards e.g. ISO5817, ISO9606, ASME IX, AWS D1.1 for dimensional, surface inspection (e.g. Visual, Magnetic Particle, Dye Penetrant) and volumetric inspection (e.g. Radiography, Ultrasonic inspection).
Complete progressive and final checks on the weld prior to release for formal inspection and report into the production control system at the appropriate stages of the work activity.
Restore the work area on completion of the activity and where applicable return any resources and consumables to the appropriate location.
Produce welds in plate and/or structural components using two welding processes from TIG, PAW, MMA, MIG/MAG, FCAW.
Produce welds in plate and/or structural components using two materials from Carbon Steel, Low Alloy Steel, High Alloy Ferritic/Martensitic Steel, Austenitic Stainless Steel, Nickel & Nickel Alloys, Aluminium & Aluminium alloys, Titanium & Titanium Alloys, Copper & Copper Alloys.
Produce welds in plate and/or structural components covering three plate welding positions which must include Vertical (either upward or downward progression) and overhead.
Produce plate welds in 3 main joint configurations (Single or Double Sided Butt, Single or Double Sided T‐Butt & Fillet)

Your training plan

Work towards Level 3 welding standard
Gain a skill for life
Exciting future career opportunities’
Apprentices without level 2 English and maths will need to achieve this level prior to taking the End-Point Assessment

Requirements

Essential qualifications

GCSE or equivalent in:

English (grade 4)
Maths (grade 4)

Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.

Skills

Communication skills
Attention to detail
Organisation skills
Problem solving skills
Number skills
Analytical skills
Logical
Team working
Creative
Patience
Physical fitness

About this company

WEC Group's in-house Training Academy was founded in 2006 and is one of the only apprenticeship scheme of its type in the UK. The four-year welding/fabrication, CNC machining and technical production engineering apprenticeships provide individuals in Lancashire, South Yorkshire, Liverpool and surrounding areas with an opportunity to gain the relevant skills to carve out a successful career in engineering. Our Academy is one of only a few TWI (The Welding Institute) certified welder training centres in the North West, and our Training and Development Manager is a CSWIP certified welder instructor and examiner which ensures our apprentices are trained to the highest international standards. Apprentices also work on exciting community projects throughout the year with local authorities, charities and residents to develop their skill sets. Recent work has seen apprentices create a 5ft stainless steel statue in tribute to LS Lowry, a replica weathervane which was donated to a local church after the original was damaged in a storm, as well as a research space rocket for Starchaser Industries. Every year we enter our apprentices into a range of awards, and also into the prestigious WorldSkills UK competition as a testament to the world class training they receive. Our welding/fabrication apprentices have won gold medals for three years in a row, as well as silver, bronze and Highly Commended. WEC Group are extremely proud to have been recognised in the UK's Top 100 Apprenticeship Employers list in 2014, 2016, and 2017. The National Apprenticeship Service Top 100 List recognises excellence in businesses that employ apprentices and showcases the breadth of employers who now offer apprenticeships. The Academy also won a range of awards over the past few years, including the BAE Systems Award for Large Employer of the Year in the Liverpool, Cumbria and Lancashire region finals in 2016, 2018 and 2019. We were also awarded the National Highly Commended Award at the National Apprenticeships Awards 2018 and 2019. WEC Group are exceptionally proud to have achieved major national recognition after being crowned with The British Army Award for Large Employer of the Year at the National Apprenticeship Awards in 2020 and the Regional Award in 2022.

https://www.wec-group.com/wecacademy.html (opens in new tab)

After this apprenticeship

Full-time employment offer at the end of the apprenticeship
Coded welding trained
Progression routes available to progress onto higher level qualifications

Ask a question

The contact for this apprenticeship is:

WEC GROUP LIMITED

Edd Belshaw

edd.belshaw@wecl.co.uk

01254 773718

The reference code for this apprenticeship is VAC1000291194.

Apply now

Closes on Friday 15 August

When you apply, you’ll be asked to sign in with a GOV.UK One Login. You can create one at the same time as applying for this apprenticeship.

After signing in, you’ll apply for this apprenticeship on the company's website.

Cookies on Find an apprenticeship

Contents