25-0067 Apprentice Welder

Summary

Nuclear Energy Components (NEC) Limited are looking for an Apprentice welder to complete a Level 3 Plate Welder apprenticeship and join their team.

Wage: £15,311.40 a year
Minimum wage rates (opens in new tab)
Training course: Plate welder (level 3)
Hours: You will work Monday to Friday. Your start and finish times including your shift pattern will be determined by the employing company.
39 hours a week
Possible start date: Monday 8 September
Duration: 3 years 3 months
Positions available: 1

Work

As an apprentice, you’ll work at a company and get hands-on experience. You’ll gain new skills and work alongside experienced staff.

What you’ll do at work

Role & responsibilities:

As an apprentice welder, the candidate will be learning to manufacture stainless steel components using the TIG welding process, whilst undergoing the training, which is a mixture of full time at the AMRC training centre followed by day release and on the job training.

Once qualified the candidate will be assembling and welding stainless steel components for the nuclear power sector and carrying out in process inspection checks using a variety of gauges, micrometres and Vernier measuring equipment whilst maintaining high standards of workshop organisation and high health and safety standards.

As a small team we like the ability to be flexible and so further on the job training opportunities such as fitting, waterjet operation and inspection can be taken up so that you become a versatile, flexible and highly skilled member of our team.

Where you’ll work

BRADWELL

HOPE VALLEY

DERBYSHIRE

S33 9NT

Training

An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.

College or training organisation

THE UNIVERSITY OF SHEFFIELD

Your training course

Plate welder (level 3)

Equal to A level

Course contents

Work safely at all times, comply with health, safety and environmental legislation, regulations and organisational requirements.
Can obtain, check and use appropriate documentation (such as job instructions, drawings, quality control documentation).
Plan and prepare welding activities before commencing the work.
Obtain, position and assemble welding equipment and associated safety protection needed for activity.
Prepare, check and protect materials and work areas ready for welding.
Inspect assembly to be welded and undertake remedial work to comply with specification, or implement quality steps if rejected.
Receive, inspect, condition and maintain consumables.
Set, test and monitor key welding parameters as detailed within the Welding Procedure Specification.
Deal promptly and effectively with problems within the limits of their responsibility using approved diagnostic methods and techniques and report those which cannot be resolved to the appropriate personnel.
Use manual processes and equipment to remove material (powered and non‐powered).
Achieves a quality of work to meet international standards e.g. ISO5817, ISO9606, ASME IX, AWS D1.1 for dimensional, surface inspection (e.g. Visual, Magnetic Particle, Dye Penetrant) and volumetric inspection (e.g. Radiography, Ultrasonic inspection).
Complete progressive and final checks on the weld prior to release for formal inspection and report into the production control system at the appropriate stages of the work activity.
Restore the work area on completion of the activity and where applicable return any resources and consumables to the appropriate location.
Produce welds in plate and/or structural components using two welding processes from TIG, PAW, MMA, MIG/MAG, FCAW.
Produce welds in plate and/or structural components using two materials from Carbon Steel, Low Alloy Steel, High Alloy Ferritic/Martensitic Steel, Austenitic Stainless Steel, Nickel & Nickel Alloys, Aluminium & Aluminium alloys, Titanium & Titanium Alloys, Copper & Copper Alloys.
Produce welds in plate and/or structural components covering three plate welding positions which must include Vertical (either upward or downward progression) and overhead.
Produce plate welds in 3 main joint configurations (Single or Double Sided Butt, Single or Double Sided T‐Butt & Fillet)
Work safely at all times, comply with health, safety and environmental legislation, regulations and organisational requirements.
Can obtain, check and use appropriate documentation (such as job instructions, drawings, quality control documentation).
Plan and prepare welding activities before commencing the work.
Obtain, position and assemble welding equipment and associated safety protection needed for activity.
Prepare, check and protect materials and work areas ready for welding.
Inspect assembly to be welded and undertake remedial work to comply with specification, or implement quality steps if rejected.
Receive, inspect, condition and maintain consumables.
Set, test and monitor key welding parameters as detailed within the Welding Procedure Specification.
Deal promptly and effectively with problems within the limits of their responsibility using approved diagnostic methods and techniques and report those which cannot be resolved to the appropriate personnel.
Use manual processes and equipment to remove material (powered and non‐powered).
Achieves a quality of work to meet international standards e.g. ISO5817, ISO9606, ASME IX, AWS D1.1 for dimensional, surface inspection (e.g. Visual, Magnetic Particle, Dye Penetrant) and volumetric inspection (e.g. Radiography, Ultrasonic inspection).
Complete progressive and final checks on the weld prior to release for formal inspection and report into the production control system at the appropriate stages of the work activity.
Restore the work area on completion of the activity and where applicable return any resources and consumables to the appropriate location.
Produce welds in plate and/or structural components using two welding processes from TIG, PAW, MMA, MIG/MAG, FCAW.
Produce welds in plate and/or structural components using two materials from Carbon Steel, Low Alloy Steel, High Alloy Ferritic/Martensitic Steel, Austenitic Stainless Steel, Nickel & Nickel Alloys, Aluminium & Aluminium alloys, Titanium & Titanium Alloys, Copper & Copper Alloys.
Produce welds in plate and/or structural components covering three plate welding positions which must include Vertical (either upward or downward progression) and overhead.
Produce plate welds in 3 main joint configurations (Single or Double Sided Butt, Single or Double Sided T‐Butt & Fillet)

Your training plan

You will study on a Level 3 Plate Welder apprenticeship. On completion of this, you will gain a qualification in Engineering at Level 3 standard.

During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the training centre for one day a week for knowledge study.

Requirements

Essential qualifications

GCSE or equivalent in:

English Language (grade Grade C or 4)
Mathematics (grade Grade C or 4)

Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.

Skills

Communication skills
Attention to detail
Organisation skills
Analytical skills
Logical
Team working
Initiative
Patience

About this company

NE Components Ltd continues the legacy of Newburgh Engineering. Established in 1939, by Isaac Middleton, Newburgh Engineering grew through those early years into a company with a reputation for consistently high quality and service. We are an ISO9001, ISO14001 and F4N accredited contract manufacturer of precision components and assemblies ranging across all sectors including: Nuclear, Defence, Oil & Gas, Aerospace, Automotive, Rail and Power Generation. NEC is a third-generation family business and became an Employee Ownership Trust in 2022. NEC’s vision is to be industry recognised as the ultimate supplier of engineering components.

After this apprenticeship

Completion of the University of Sheffield’s AMRC Training Centre apprenticeships are nationally recognised qualifications which are acknowledged and respected by employers across the world. These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide.

Ask a question

The contact for this apprenticeship is:

THE UNIVERSITY OF SHEFFIELD

AMRC Training Centre Recruitment Team

recruitment@amrctraining.co.uk

The reference code for this apprenticeship is VAC1000302575.

Apply now

Closes on Thursday 31 July 2025

When you apply, you’ll be asked to sign in with a GOV.UK One Login. You can create one at the same time as applying for this apprenticeship.

After signing in, you’ll apply for this apprenticeship on the company's website.

Company’s application instructions

Please follow the link to apply on the University of Sheffield’s AMRC Training Centre website and complete an application form. Once this has been received, it will be reviewed, and you will receive an email response with the next steps of the application process. Please note the AMRC Training Centre reserves the right to close company vacancies, should they get filled, ahead of the published closing date.

Cookies on Find an apprenticeship

Contents