25-0056 Fabricator Welder Apprentice

Summary

A fabricator will produce work made from thick metal plates and structural steel sections, such as columns and beams, using a wide range of tools and equipment. This will contribute to projects for large-scale buildings such as the Nuclear Power plant at Hinckley Point C - which is currently the largest construction site in Europe.

Wage: £17,888 a year
Minimum wage rates (opens in new tab)
Training course: Metal fabricator (level 3)
Hours: You will work Monday to Friday. Your start and finish times including your shift pattern will be determined by the employing company.
40 hours a week
Possible start date: Monday 8 September
Duration: 3 years 3 months
Positions available: 2

Work

As an apprentice, you’ll work at a company and get hands-on experience. You’ll gain new skills and work alongside experienced staff.

What you’ll do at work

Role & responsibilities:

Read and interpret engineering drawings
Assemble components by welding them together
Ensure finished welds are of a good standard and the required size
Use a variety of tools, welding equipment and overhead travelling cranes
Implementation and adhering to all health and safety policies and complete all paperwork relating to health and safety

Where you’ll work

Fullerton Road

Rotherham

S60 1DJ

Training

An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.

College or training organisation

THE UNIVERSITY OF SHEFFIELD

Your training course

Metal fabricator (level 3)

Equal to A level

Course contents

Work safely at all times, comply with health & safety legislation, regulations and organisational requirements.
Comply with environmental legislation, regulations and organisational requirements.
Obtain, check and use the appropriate documentation (such as job instructions, drawings, quality control documentation).
Carry out relevant planning and preparation activities before commencing work activity.
Undertake the work activity using the correct processes, procedures and equipment.
Carry out the required checks (such as quality, compliance or testing) using the correct procedures, processes and/or equipment.
Deal promptly and effectively with problems within the limits of their responsibility using approved diagnostic methods and techniques and report those which cannot be resolved to the appropriate personnel.
Complete any required documentation using the defined recording systems at the appropriate stages of the work activity.
Restore the work area on completion of the activity and where applicable return any resources and consumables to the appropriate location.
Identify and follow correct Metal work instructions, specifications, drawing etc.
Mark out using appropriate tools and techniques.
Cut and form Metal for the production or maintenance of fabricated products.
Produce and assemble Metal products to required specification and quality requirements.
Identify and follow correct joining instructions, specifications, drawing etc.
Carry out the relevant preparation before starting the joining fabrication activity.
Set up, check, adjust and use joining and related equipment.
Weld joints in accordance with approved welding procedures and quality requirements.
Work safely at all times, comply with health & safety legislation, regulations and organisational requirements.
Comply with environmental legislation, regulations and organisational requirements.
Obtain, check and use the appropriate documentation (such as job instructions, drawings, quality control documentation).
Carry out relevant planning and preparation activities before commencing work activity.
Undertake the work activity using the correct processes, procedures and equipment.
Carry out the required checks (such as quality, compliance or testing) using the correct procedures, processes and/or equipment.
Deal promptly and effectively with problems within the limits of their responsibility using approved diagnostic methods and techniques and report those which cannot be resolved to the appropriate personnel.
Complete any required documentation using the defined recording systems at the appropriate stages of the work activity.
Restore the work area on completion of the activity and where applicable return any resources and consumables to the appropriate location.
Identify and follow correct Metal work instructions, specifications, drawing etc.
Mark out using appropriate tools and techniques.
Cut and form Metal for the production or maintenance of fabricated products.
Produce and assemble Metal products to required specification and quality requirements.
Identify and follow correct joining instructions, specifications, drawing etc.
Carry out the relevant preparation before starting the joining fabrication activity.
Set up, check, adjust and use joining and related equipment.
Weld joints in accordance with approved welding procedures and quality requirements.

Your training plan

You will study on a Level 3 Metal Fabricator apprenticeship. On completion of this, you will gain a qualification in Engineering at Level 3 standard.

During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the training centre for one day a week for knowledge study.

Requirements

Essential qualifications

GCSE or equivalent in:

English Language (grade Grade C or 4)
Mathematics (grade Grade C or 4)

Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.

Skills

Communication skills
Attention to detail
Organisation skills
Analytical skills
Logical
Team working
Initiative
Patience

About this company

The William Hare Group is a world-leading steel business, providing value engineered steel solutions to some of the world’s most innovative and sustainable construction projects. William Hare was formally incorporated in 1945 and is now the leading independent steel fabrication company in the UK with an annual turnover in excess of £170 million. We continue to build on this foundation by working in both emerging and well-established sectors, all over the world.

After this apprenticeship

Completion of the University of Sheffield’s AMRC Training Centre apprenticeships are nationally recognised qualifications which are acknowledged and respected by employers across the world. These can open the door to many more opportunities, such as Engineering Management and Project Engineering positions across a range of sectors worldwide.

Ask a question

The contact for this apprenticeship is:

THE UNIVERSITY OF SHEFFIELD

AMRC Training Centre Recruitment Team

recruitment@amrctraining.co.uk

The reference code for this apprenticeship is VAC1000300642.

Apply now

Closes on Thursday 31 July 2025

When you apply, you’ll be asked to sign in with a GOV.UK One Login. You can create one at the same time as applying for this apprenticeship.

After signing in, you’ll apply for this apprenticeship on the company's website.

Company’s application instructions

Please follow the link to apply on the University of Sheffield’s AMRC Training Centre website and complete an application form. Once this has been received, it will be reviewed, and you will receive an email response with the next steps of the application process. Please note the AMRC Training Centre reserves the right to close company vacancies, should they get filled, ahead of the published closing date.

Cookies on Find an apprenticeship

Contents