Autocare Technician Apprentice - Savoy

SAVOY TYRES LTD

HULL (HU8 0TY)

Closes in 26 days (Friday 23 May 2025 at 11:59pm)

Posted on 25 April 2025

---

Summary

An exciting opportunity to work in one of 13 well-established Savoy autocentres based in Hull. This exciting opportunity will allow you to work not only on repairing and maintaining vehicles you will gain experience and knowledge of hybrid vehicles, air conditioning, parts stock management, customer service, sales and much more.

• Wage:

  £15,704 for your first year, then could increase depending on your age

  National Minimum Wage rate for apprentices

  Check minimum wage rates (opens in new tab)

  Additional bonus scheme in place

• Training course: Autocare technician (level 2)
• Hours: Monday - Saturday, between 08:30 - 17:30. Days and shifts TBC.

  40 hours a week

• Start date:

  Monday 1 September 2025

• Duration:

  2 years 6 months

• Positions available:

  1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you’ll do at work

If you would like to gain experience and knowledge in the following areas to start your career in the motor industry, this is the apprenticeship for you!

Responsibilities will include:

• Demonstrate expertise, not only on the technical aspects of motor vehicle technology but also in retail, parts and customer service
• Hybrid / electric vehicle system and safe working practices
• Vehicle 4-wheel geometry principles
• Vehicle systems including battery, charging and air conditioning
• Tyre maintenance, legislation and technical information
• Fundamentals of specialist vehicle systems
• Use a range of tools, measuring and diagnostic equipment to identify and repair similar system faults
• Experience how the business works and how you contribute to the overall results, demonstrating commercial awareness

Where you’ll work

SAVOY RD
INGS ROAD ESTATE
HULL
HU8 0TY

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

College or training organisation

NORTH HUMBERSIDE MOTOR TRADES GROUP TRAINING ASSOCIATION

Your training course

Autocare technician (level 2)

Equal to GCSE

Course contents

• Comply with health and safety procedures in the workplace in compliance with regulations, standards, and guidance.
• Prepare the vehicle and working area before the work activity. For example, remove or mitigate slip and trip hazards.
• Maintain and restore the work area during and on completion of the activity.
• Store, maintain, including calibration checks, and return tools and equipment to storage.
• Access vehicle technical data to inform inspections and make judgements on wear and serviceability.
• Comply with environmental and sustainability procedures, regulations, standards, and guidance. Segregate resources for reuse, recycling, and disposal.
• Apply vehicle safety inspection and routine maintenance procedures using vehicle specific data on car, car derived van or light goods vehicle.
• Select and use tools and equipment, mechanical and electrical measuring tools, and diagnostic equipment.
• Remove and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
• Remove, repair and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
• Inspect, remove, and replace of parts or components in cars, car derived vans, or light goods vehicles for the following: steering systems and suspension systems, braking systems, emission systems, air conditioning systems, battery and charging systems, fluid and filtration systems.
• Apply state-of-health condition monitoring tests to high voltage batteries and chargers for electrified cars, car derived vans, or light goods vehicles.
• Apply four-wheel geometry checks and adjustments to cars, car derived vans, and light goods vehicles.
• Apply safe working practices and procedures to isolate electrified vehicles for maintenance.
• Record vehicle service maintenance, parts replacement, or repair.
• Apply customer service principles and organisational customer care practices. For example, identifying customer and vehicle needs, resolve low level customer complaints, make recommendations to customers based on results of inspection, maintenance, or repair of vehicles, customer payment transactions and organisational sales processes.
• Provide quotation of cost and order automotive parts, products, and consumables applicable to the vehicle.
• Apply procedures for stock and parts storage: ordering, checking and stock rotation.
• Apply organisational sales processes. For example, show and tell, features and benefits, consultative selling, mini closing and closing.
• Apply team working principles.
• Comply with equity, diversity, and inclusion guidance.
• Communicate with others verbally, for example customers, suppliers, and colleagues.
• Communicate in writing, for example with internal and external customers, colleagues, and managers.
• Use information and digital technology systems. Comply with GDPR and cyber security.
• Complete and record learning and development activities.
• Apply procedures to check and replace fluids, and filtration parts.
• Comply with health and safety procedures in the workplace in compliance with regulations, standards, and guidance.
• Prepare the vehicle and working area before the work activity. For example, remove or mitigate slip and trip hazards.
• Maintain and restore the work area during and on completion of the activity.
• Store, maintain, including calibration checks, and return tools and equipment to storage.
• Access vehicle technical data to inform inspections and make judgements on wear and serviceability.
• Comply with environmental and sustainability procedures, regulations, standards, and guidance. Segregate resources for reuse, recycling, and disposal.
• Apply vehicle safety inspection and routine maintenance procedures using vehicle specific data on car, car derived van or light goods vehicle.
• Select and use tools and equipment, mechanical and electrical measuring tools, and diagnostic equipment.
• Remove and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
• Remove, repair and replace vehicle tyre and balance wheel assemblies on car, car derived van or light goods vehicle. For example, ultra-low profile, directional, asymmetric, run-flat tyres.
• Inspect, remove, and replace of parts or components in cars, car derived vans, or light goods vehicles for the following: steering systems and suspension systems, braking systems, emission systems, air conditioning systems, battery and charging systems, fluid and filtration systems.
• Apply state-of-health condition monitoring tests to high voltage batteries and chargers for electrified cars, car derived vans, or light goods vehicles.
• Apply four-wheel geometry checks and adjustments to cars, car derived vans, and light goods vehicles.
• Apply safe working practices and procedures to isolate electrified vehicles for maintenance.
• Record vehicle service maintenance, parts replacement, or repair.
• Apply customer service principles and organisational customer care practices. For example, identifying customer and vehicle needs, resolve low level customer complaints, make recommendations to customers based on results of inspection, maintenance, or repair of vehicles, customer payment transactions and organisational sales processes.
• Provide quotation of cost and order automotive parts, products, and consumables applicable to the vehicle.
• Apply procedures for stock and parts storage: ordering, checking and stock rotation.
• Apply organisational sales processes. For example, show and tell, features and benefits, consultative selling, mini closing and closing.
• Apply team working principles.
• Comply with equity, diversity, and inclusion guidance.
• Communicate with others verbally, for example customers, suppliers, and colleagues.
• Communicate in writing, for example with internal and external customers, colleagues, and managers.
• Use information and digital technology systems. Comply with GDPR and cyber security.
• Complete and record learning and development activities.
• Apply procedures to check and replace fluids, and filtration parts.

Your training plan

• Delivery of the Level 2 Autocare Technician Apprenticeship Standard 
• One day per week at the GTA  
• English and maths Functional Skills up to level 1 if required  

Requirements

Desirable qualifications

GCSE or equivalent in:

• English (grade 4)
• Maths (grade 4)

Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.

Skills

• Communication skills
• Organisation skills
• Customer care skills
• Problem solving skills
• Number skills
• Team working
• Patience
• Physical fitness

Other requirements

Travel to work in Hull each day and to College in Hessle for one day per week.

About this company

Our main aim from day one has been to look after our customers by offering an excellent level of customer service, combined with friendly sales staff, high quality workmanship and, of course, very competitive prices. Our commitment to our customers has resulted in a high level of people returning to us again and again; we then knew we had the right strategy. With this in mind we opened our second depot in Beverley, followed by Willerby (West Hull), then South Orbital (Hull). This meant we could offer the people and businesses of the city of Hull and surrounding areas a depot close to them. After our depots in Hull became established, we then opened Scunthorpe and Grimsby, and continued our philosophy of excellent customer care. Most recently our two depots in Sheffield were opened and Howden followed shortly after that. We plan to continue expanding within our existing region, but we’re not growing just to be the biggest; we intend to remain a company that offers excellent value for money to our customers and be small enough to care yet big enough to offer some of the best deals around.

After this apprenticeship

• Upon successful completion of this apprenticeship you will have the opportunity to progress onto a light vehicle maintenance apprenticeship standard (level 3 equivalent)

Ask a question

The contact for this apprenticeship is:

NORTH HUMBERSIDE MOTOR TRADES GROUP TRAINING ASSOCIATION

Rachael Owen

rachael@motortradesgta.org

01482353022

The reference code for this apprenticeship is VAC1000317211.

Apply now

Closes in 26 days (Friday 23 May 2025 at 11:59pm)

When you apply, you’ll be asked to sign in with a GOV.UK One Login. You can create one at the same time as applying for this apprenticeship.