Level 2 Interior Systems Dry Liner Apprenticeship - GA Interiors Ltd – Find an apprenticeship

Summary

GA Interiors Ltd is a specialist subcontractor delivering high-quality interior fit-out solutions across the UK. Established in 2018, the company is headquartered in Kent and provides services including drylining, plastering, suspended ceilings, floor screeding, SFS framing, cladding, rendering, carpentry, and joinery.

Wage

£13,741 for your first year, then could increase depending on your age

National Minimum Wage rate for apprentices

Check minimum wage rates (opens in new tab)

Training course

Interior systems installer (level 2)

Hours

Monday to Friday, 8:00am to 4:00pm.

35 hours a week

Start date

Friday 20 June 2025

Duration

2 years

Positions available

1

Work

Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.

What you’ll do at work

GA Interiors Ltd is looking for a motivated and enthusiastic Drylining Apprentice to join our team. This is an excellent opportunity to begin a rewarding career in construction, working alongside experienced professionals and earning while you learn.

As a Drylining Apprentice, you will assist in the installation of internal walls, partitions, suspended ceilings, and other drylining systems on live residential construction site.

Responsibilities:

Supporting the team with setting out and preparing materials.
Measuring, cutting, and fixing plasterboard and other systems.
Installing metal stud partitions and ceiling systems.
Learning to read technical drawings and specifications.
Maintaining health and safety standards on site.
Keeping your work area clean and organised.

Where you’ll work

42 Station Road
Colliers Wood
Merton
SW19 2LP

Training

Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.

College or training organisation

LET ME PLAY LIMITED

Your training course

Interior systems installer (level 2)

Equal to GCSE

Course contents

Measure and set out from drawings provided and check vertical and horizontal datum
Select the appropriate materials, tools and equipment in accordance with the specification requirements and or manufacturer specific instructions
Safely and correctly operate tools and equipment, plant and machinery appropriate for use. (e.g. scaffold, MEWPS, nail gun, circular saw, lasers
Apply fire and acoustic mastic seals in accordance with specification, designs details and manufacturers recommendations
Accurately measure and cut components (e.g. metal sections, plasterboard, insulation, timber and plywood)
Appropriately fix all components according to specifications and/or drawings
Effectively protect surround surfaces and segregate work areas and cutting areas
Install dry lining systems to metal and stud partitions framed wall linings, framed and frameless beam and column encasements
Clearly communicate with management, customers and colleagues including other trades onsite
Maintain a clean and tidy environment, appropriately disposing of waste according to site procedures
Identify and select appropriate PPE for the task
Install pattresses
Install insulation
Form service penetrations through partitions
Install primary channels or main runners to line and level. Cut to length
Frame and fit access panels
install drylining and plasterboard linings eg panels, plasterboards, metal sections, timber battens, wallboards, thermal boards, glass reinforced gypsum board, fixings and fittings
Select the appropriate materials, tools and equipment for installing drylining and plasterboard linings
Install and remove drylining systems according to manufacturers guidelines eg British Gypsum, Knauf, Siniat
Form openings and junctions in accordance with drawing specifications
Carry out repairs to dry lining and plasterboard walls and ceilings in accordance with design details, specification and manufacturers recommendations
Form and Fix standard deflection heads in accordance with manufactures standard details
Accurately measure and cut components
Appropriately fix all components according to specification/drawings.
Install different types of drylining systems eg Twin walls, Staggered studs, Service shaft partitions, Curved walls, Walls over 3 metres high
Cut and fix tracks at appropriate centres according to Specification & manufactures instructions
Apply wall coverings according to Specification & manufactures instructions
Install door and window frames in accordance with drawings.
Fit cover trims and skirtings in accordance with Specification & manufactures instructions
Install glazing, blinds and manifestations to meet customer requirements
Hang door leaf complete with ironmongery including cutting and fitting of door furniture (eg hinges, levers, locks, closers and signage).
Cut and fix hangers in accordance with specification, manufacturers recommendations and FIS best practice guidlines
Install ceiling perimeter trim to level. Ensure trims are cut to length and form internal and external corner mitres.
Install subgrid eg hangers and heavy gauge channel to bridge services, heavy gauge channel between roof purlins
Fix secondary grid / cross tees ensuring grid is square and following manufacturers recommended installation. Form upstand using cross tee and appropriate trims or channels
Cut and install service tiles and pattresses e.g. form square and circular service cut outs through mineral tiles with plywood pattress or metal tiles and insulation pad
Complete tiling including: Perimeter tile cuts to mineral and metal tile; tegular tile edges to mineral tile; perimeter wedges for cut metal tiles; tile clips to back of mineral ceiling tiles; insulation pads to back of metal ceiling
Remove sections of ceiling and replace damaged grid & tile
Measure and set out from drawings provided and check vertical and horizontal datum
Select the appropriate materials, tools and equipment in accordance with the specification requirements and or manufacturer specific instructions
Safely and correctly operate tools and equipment, plant and machinery appropriate for use. (e.g. scaffold, MEWPS, nail gun, circular saw, lasers
Apply fire and acoustic mastic seals in accordance with specification, designs details and manufacturers recommendations
Accurately measure and cut components (e.g. metal sections, plasterboard, insulation, timber and plywood)
Appropriately fix all components according to specifications and/or drawings
Effectively protect surround surfaces and segregate work areas and cutting areas
Install dry lining systems to metal and stud partitions framed wall linings, framed and frameless beam and column encasements
Clearly communicate with management, customers and colleagues including other trades onsite
Maintain a clean and tidy environment, appropriately disposing of waste according to site procedures
Identify and select appropriate PPE for the task
Install pattresses
Install insulation
Form service penetrations through partitions
Install primary channels or main runners to line and level. Cut to length
Frame and fit access panels

Your training plan

This training plan has not been finalised. Check with this employer if you’ll need to travel to a college or training location for this apprenticeship.

Requirements

Desirable qualifications

GCSE in:

English (grade Grade 4/C or above)
Maths (grade Grade 4/C or above)

Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.

Skills

Communication skills
IT skills
Attention to detail
Organisation skills
Customer care skills
Problem solving skills
Team working
Creative
Non judgemental
Patience

Other requirements

Pre-employment checks. Please be aware that upon a successful offer of employment the company completes digitalised right-to-work checks and DBS applications via an external provider - 'Matrix Screening'. The company also completes an internal online social media search, in line with Keeping Children Safe in Education guidance.

About this company

Inspire ATA is an official Flexi-Job Apprenticeship Agency, licenced by the Department for Education. Currently ranked 1st in the Rate My Apprenticeship Top 100 Apprenticeship Employers in the UK Award 2024-2025. Inspire ATA specialises in creating apprenticeship opportunities, where we recruit and employ the apprentice on behalf of our host clients, enabling us to offer additional support and a better experience for both the apprentice and the client as the experts in the industry. We arrange the most suitable and appropriate apprenticeship training from one of our partnered training providers. If you are successful in securing an apprenticeship with Inspire ATA, it is important to understand that Inspire ATA will be your employer and the apprenticeship placement will be a separate organisation that simply hosts you as an apprentice. As a Flexi-Job Apprenticeship Agency, Inspire ATA performs an important role in developing the UK labour market and it is our responsibility to ensure that talent is recognised, developed, and matched with business needs, whatever the background of the individual, irrespective of gender, race, disability, age, religion or belief, relationship orientation, marital or civil partnership status, pregnancy or maternity and gender reassignment. We are proud of the diverse nature of our business and work with clients to ensure that all candidates are treated with courtesy and respect.

Company benefits

Eligible for an NUS card for discounts in shops and restaurants. Eligible for an apprenticeship oyster card, 30% off travel. Discount on Nandos, ASOS, Vue cinema and much more. Automatic rise in pay after 12 months.

After this apprenticeship

Potential for full-time employment and/or further training.

Ask a question

The contact for this apprenticeship is: